Checking out idled trucks used for spare parts during the economic downturn before they return to service will be particularly important after new federal safety regulations go into effect this fall, says Chris Harrison, general manager of CIT Kenworth of Morton, Ill., a leading Paccar Parts firm with seven Kenworth dealerships in Illinois.
Comprehensive Safety Analysis 2010 (CSA 2010), (click here) places greater significance on truck maintenance and includes more stringent penalties for violations.
Andy Cox, service manager for CIT Kenworth of Chicago in Joliet, Ill., said the practice of using idled trucks for spare parts was common among a variety of customers from line haulers to construction companies.
Cox recommends a parts inventory and fleet maintenance tracking program, something like the PremierCare Connect system offered by Kenworth Truck Co. The Connect system is particularly useful because they can help fleets keep track of needed repairs, particularly ones identified by the drivers, which CSA 2010 will require. They also link the company’s service department directly to the parts department at the local dealer, Cox said. The hosted system can then be set to automatically order high-demand parts.
“One of the issues we run into is where parts have been taken off of sidelined trucks, but no records were ever kept of which parts were removed,” Cox said. “So if they took a fuel pressure sensor, for example, and no one wrote it down, then nobody would notice until somebody tried to start the truck.”
The new CSA 2010 program identifies 10 different groups of parts and accessories that the government considers critical for safe operation. Among them are lamps, reflective devices, electrical wiring, brakes, glazing and window construction, fuel systems, coupling devices including fifth wheels, miscellaneous equipment such as heaters, and frames, cab and body components. So, for any sidelined trucks that fleets will return to service, Harrison and Scott Dehm, body shop manager at Central Illinois Kenworth in Normal, also recommend the following steps:
• Check the fuel tanks, fuel lines, and fuel filters before putting idled trucks back into service. During the winter, water or moisture can condensate on top of the fuel tank from the fuel constantly freezing and thawing. The lower the fuel level in the tank, the bigger the problem can be, he added. The algae forms from the condensation, not on the diesel fuel itself, but it can contaminate the fuel.
• Do not use diesel additives to treat algae in a fuel tank. The truck should be towed to a repair facility that can drain the fuel tank, the fuel pump and fuel lines, properly dispose of the contaminated fuel and clean the injectors and filters, he added. Using additives inside the tank can make the contamination problem worse, particularly if the truck has a 2007 model or newer engine. Newer engines depend on a fuel with a very low sulfur content in order to meet the strict emission limits set by the U.S. Environmental Protection Agency or the California Air Resources Board.
• Replace damaged fuel tanks with OEM-quality replacement tanks. TRP Aftermarket Parts offers replacement fuel tanks made by an ISO-certified manufacturer that uses the same thickness and grade of aluminum standards called for in OEM manufacturing.
• Check engine oil seals. When trucks sit for long periods of time without being routinely started and allowed to run for brief amounts of time, the rubber in the seals can actually dry out and deteriorate, and
• Examine drive belts, hoses, fittings and adaptors, plus the exhaust system for leaks. If they need to be replaced, choose quality replacements like those offered by Dynacraft and TRP®.
Harrison said before returning an idled truck to service, it should always be checked out by a trained qualified technician since CSA 2010 establishes vehicle maintenance as one of seven categories under which carriers will be examined.
Harrison and Dehm also recommend a number of maintenance steps truck operators and maintenance managers can take to be prepared for CSA 2010:
• Wash the truck and trailer routinely, particularly during the winter season to remove chemical de-icers and road salts from trucks and trailers. Routine washings not only prevent corrosion of the body, they also prevent buildup and potential damage to the truck’s and trailer’s electrical system and wheel components including brakes. Routine washings also help prevent build up of road salts on fifth wheels, which can cause them to seize up. Quality brake components, like the spring brake chambers offered by TRP Aftermarket Parts, feature coatings that protect them from rust jacking caused by chemicals and road salts. However, allowing calcium chlorides and salts to settle on truck and trailer parts for long periods of time can encourage premature damage, particularly if any cracks or chips develop in the protective coating.
• Develop a routine maintenance program for trailers that includes periodic inspections and replacement of trailer brakes such as the spring brake chambers offered by TRP. Trailers often sit unused for long periods of time in truck operations.
• Consider a replacement program for truck, tractor and trailer lights. New light emitting diode (LED) lighting products, like those available from TRP Aftermarket Parts, can enhance detection of the vehicle or trailer when it’s parked in a dark or dimly lit parking lot or on the side of a road, something that’s particularly important in the dead of winter.
• Follow engine manufacturers’ recommendations for regular valve adjustments and DPF filter cleanings, like the FSX cleaning service provided by participating Kenworth and Peterbilt dealers for trucks equipped with 2007 or later compliant emission systems, and
• Conduct regular analysis of your engine oil condition. This can help you identify potential failures prior to a major expense or downtime.
“As with any vehicle or trailer, regular preventive maintenance properly conducted can identify the potential for problems in the shop before they occur on the road or become a violation of the new federal regulations,” Harrison said.
Paccar Parts operates a network of parts distribution centers worldwide, which offer aftermarket parts sales support to Kenworth, Peterbilt, and DAF dealerships around the world. The company offers quality brands that not only meet OEM specifications, but also customers’ expectations regardless which major manufacturer makes their trucks. Among those brands are CLIMATECH, ROADLEVELER, and MIRREX.
Paccar Parts also distributes TRP Aftermarket Parts for commercial vehicles, which are available through a network of authorized retailers that include Kenworth, Peterbilt, and DAF dealerships. From dump trucks to cement mixers, delivery vans to tractor trailers, school buses to transit buses, TRP offers reliable aftermarket products that are designed and tested to exceed customers’ expectations regardless of the vehicle make, model or age. For more information, visit www.TRPParts.com.
Dorothy Cox of The Trucker staff may be contacted to comment at email@example.com.