Connect with us

Equipment

Mack displays second generation hybrid-electric drayage truck

Published

on

Mack Trucks recently displayed its second-generation zero-emission capable Class 8 drayage truck at the California Air Resources Board Low Carbon Transportation Heavy-Duty Showcase in Sacramento, California. (Courtesy: MACK TRUCKS)

GREENSBORO, N.C. — Mack Trucks displayed its second-generation zero-emission capable Class 8 drayage truck at the California Air Resources Board (CARB) Low Carbon Transportation Heavy-Duty Showcase in Sacramento, California, recently.

The plug-in hybrid electric (PHEV) truck, which is based on a Mack Pinnacle axle back daycab, has been operating in revenue service with a customer drayage fleet for more than 12 months.

The CARB showcase features projects funded under the California Climate Investments program. Grant awardees presented key project findings, lessons learned and next steps to advance clean technology in heavy-duty applications on one of three technology panels. The morning began with a legislative press event and also included a poster session to facilitate dialogue and networking.

“Mack Trucks has been a powertrain innovator for more than a century, and we’re proud to showcase our current and developmental technologies to help reduce emissions,” said Jonathan Randall, Mack Trucks senior vice president, North American sales and marketing. “Testing of this truck has allowed us to validate the emission reduction potential of the PHEV technology in combination with self-learning algorithms to control electric operation. We look forward to continuing real-world testing, as well as collaborating with CARB, SCAQMD and others.”

The truck is being tested as part of a $23.6 million project led by the South Coast Air Quality Management District (SCAQMD). The goals of the project include reducing pollution and greenhouse gas emissions at locations with heavy freight volumes, including ports, rail yards and the freight corridors connecting them.

The truck is an evolution of the first Mack PHEV drayage truck, which was built as part of an earlier SCAQMD-sponsored project and displayed during Advanced Clean Transportation (ACT) Expo 2016. That truck underwent more than six months of successful testing in a customer drayage fleet at the Ports of Long Beach and Los Angeles.

Similar to the first-generation truck, the second-generation PHEV drayage truck is capable of zero-emission operation as a result of the integration of a Mack MP7 diesel engine with a parallel hybrid system and lithium-ion battery pack. Unlike the first-generation truck, which utilized geo-fencing capabilities similar to those enabled by Mack’s GuardDog Connect telematics platform to switch between zero-emission and hybrid operating modes, the second generation truck relies on an adaptive self-learning algorithm to identify and create zero-emission zones in order to maximize all-electric operation.

During normal operation, the truck records the load, speed, and power and torque demand, analyzes that data and combines it with GPS location information to identify, create and store in its memory zones where the electric driveline is capable of operating in zero-emission mode. The truck learns from its operating patterns and, on subsequent trips through these zones, the truck automatically switches from hybrid operation to zero-emission operation. The driver can also use a button in the dash to manually override the mode selection if needed.

This innovative, self-learning approach has enabled the second-generation truck to operate in zero-emission mode more than twice as much as the first-generation truck, which relied solely on preset geo-fences. The dramatic increase in all-electric range was achieved with no changes to battery pack size or capacity, or truck performance, Randall said.

 

 

 

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Schneider continues to grow investment in intermodal equipment

Published

on

Schneider officials said benefits of the additional intermodal equipment includes consistent and cost-efficient shipping, decreased downtime and improved reliability, increased availability, improved service and load acceptance and enhanced safety. (Courtesy: SCHNEIDER)

GREEN BAY, Wis. —   Schneider completed its conversion to a company-owned and managed chassis fleet last year, and continues to invest in company-owned equipment including intermodal chassis, containers and tractors.

The company added more than 4,200 intermodal containers in 2018, bringing its total to 22,200 – a 24 percent increase year over year. The containers – combined with the corresponding number of company chassis to maintain a private fleet – allow Schneider to provide truck-like service in the intermodal segment. In a world of tight capacity, shippers and drivers are experiencing the benefits of Schneider’s company-owned intermodal equipment, according to Jim Filter, senior vice president and general manager of Schneider’s intermodal division.

“Investing in reliable company-owned equipment means we don’t have to rely on equipment pools and, as a result, we have offered a better experience to our customers and dray drivers,” Filter said. “With Schneider-owned chassis, drivers experience less downtime due to their easy access and low maintenance needs. Investing in the equipment space delivers a win-win for drivers and shippers.”

Filter said benefits and productivity gains that shippers and drivers are experiencing as a result of Schneider’s company-owned intermodal equipment investments include:

  • Consistent and cost-efficient shipping: By working with an asset-based intermodal provider that has new lightweight chassis, shippers can move up to 700 pounds more than the common pool chassis for a total of 45,500 pounds with a day-cab tractor. The weight of all Schneider chassis is the same, so the shipper knows how much weight it can haul with every load.
  • Increased availability: The demand for chassis in shared pools often outstrips supply, as recently experienced in the Chicago market. Schneider’s equipment increases supply and allows the company to precisely match the number of customer orders to equipment availability.
  • Decreased downtime and improved reliability: Schneider’s high-quality chassis and complete control over the maintenance of those chassis allows the company to maintain equipment, identify issues and make repairs before they turn into critical breakdowns and costly delays.
  • Improved service and load acceptance: Available and reliable chassis have already led to increased productivity, which has improved driver retention and dray capacity availability.
  • Enhanced safety: Consistent with Schneider’s No. 1 core value of Safety First, and Always, the company’s maintenance control over the assets also ensures all Schneider chassis are well maintained.

Schneider plans to continue investing in intermodal containers, chassis and tractors to continue supporting the needs of both shippers and drivers, Filter said.

For more information about shipping with Schneider Intermodal, visit www.schneider.com, email solutions@schneider.com or call 844-701-LOAD.

 

 

Continue Reading

Equipment

Mack Trucks seeks entries for 2020 Mack calendar contest

Published

on

Mack Trucks launched its 2020 Mack Calendar Contest, which runs from April 2 to May 31, 2019. Six lucky owners of Mack® trucks will be chosen by Mack’s fans and followers to appear in next year's Mack Calendar. (Courtsey: MACK TRUCKS)

GREENSBORO, N.C. — Owners of Mack trucks have the chance to once again be in the spotlight for a month courtesy of the 2020 Mack Calendar Contest.

For the fourth year running, six lucky truck owners will be chosen by Mack Trucks’ social media followers to appear in next year’s Mack Calendar. The contest runs from April 2 to May 31, 2019.

“Mack built its reputation on the hardest-working trucks and owners in the industry, and great-looking Mack trucks are always celebrated by our passionate fans,” said John Walsh, Mack Trucks vice president of marketing. “The calendar contest gives everyone a chance to express their Mack pride and vote for their favorite trucks to be featured in next year’s calendar.”

Nominations will be accepted in categories for each of Mack’s current models, including the Mack Anthem, Pinnacle, Granite, Granite MHD, LR and TerraPro, plus an additional category for Mack models which are no longer in production. All nominated trucks must be in revenue-producing service. The truck must be in routine actual use and not kept as a show truck or antique.

Mack’s fans and followers will vote on which truck they like best in each category and are allowed to cast one vote per day, per category for the duration of the contest.

Contest entrants are urged to get out the vote through their own social media channels to increase their chances of winning. Winning trucks will receive a professional photo shoot, courtesy of Mack Trucks, and will be featured in the 2020 Mack Calendar.

The Mack Calendar is eagerly anticipated each year by Bulldog aficionados and is distributed around the world.

To enter a truck or cast a vote, click here.

 

 

Continue Reading

Equipment

Kenworth delivers tractor with 200,000th Paccar MX engine

Published

on

Kenworth, Paccar and UPS officials gather for the delivery of the 200,000th Paccar MX engine. From left are Kathie Falcone, Kenworth director of sales operations; Kevin Baney, Kenworth assistant general manager for sales & marketing; Mark Collins, UPS director of maintenance and engineering for transportation equipment; Bill Brentar  UPS senior director of maintenance and engineering for transportation equipment; Katie Guest, new truck sales, MHC Kenworth – Atlanta; Eddie Davis, MHC Kenworth vice president; Andy Manos, Kenworth national fleet service manager; and Lance Walters, plant manager, for the Paccar Engine Plant in Columbus, Mississippi. (Courtesy: KENWORTH TRUCK CO.)

COLUMBUS, Miss. —  The 200,000th Paccar MX engine produced for the North American market at the Paccar Engine Co.’s engine plant in Columbus, Mississippi, was celebrated recently during a special presentation to UPS. The milestone engine is a Paccar MX-13 was installed in a Kenworth T680 Day Cab going into service in UPS regional haul operations.

“It was fitting to recognize UPS with the 200,000th Paccar MX series engine. We have established an excellent collaboration with UPS over the years, aided by the strong support of MHC Kenworth – Atlanta and the Paccar Columbus engine plant,” said Mike Dozier, Kenworth general manager and Paccar vice president. “Paccar MX engines are known for outstanding fuel efficiency, exceptional reliability and durability, low ownership cost, high horsepower and torque ratings, and quiet operation. These important attributes provide tangible benefits to UPS and all our customers operating Paccar MX engines.”

“We appreciate the selection of UPS to receive the milestone 200,000th Paccar MX engine for installation in our newest Kenworth T680. Our Kenworth T680s equipped with Paccar MX engines are performing well in UPS operations throughout the United States,” said Bill Brentar, UPS Senior Director of Maintenance and Engineering for Transportation Equipment at the company’s headquarters in Atlanta, Ga. “UPS maintains a productive working relationship with Kenworth and MHC Kenworth – Atlanta, and we look forward to our continued mutual success.”

UPS purchased its first Kenworth trucks with Paccar MX engines from MHC Kenworth – Atlanta in 2012. Today, UPS operates more than 3,000 Kenworth T680s with the Paccar MX-13 engine.

“Our collaboration with UPS is very important. UPS further optimized the Paccar MX-13 engine’s benefits by also making the Paccar 12-speed automated transmission standard for its T680s, beginning with last year’s 700-truck order of Kenworth’s on-highway flagship,” said Eddie Davis, MHC Kenworth vice president.

During the special ceremony, Kevin Baney, Kenworth assistant general manager for sales and marketing, presented a special commemorative plaque to Brentar and Mark Collins, UPS director of maintenance and engineering for transportation equipment. Also participating were MHC Kenworth’s Eddie Davis, and Katie Guest, new truck sales, MHC Kenworth – Atlanta; Lance Walters, plant manager for the Paccar Engine Plant in Columbus, Mississippi; Kathie Falcone, Kenwoth director of sales operations; and Andy Manos, Kenworth national fleet service manager.

The Paccar MX engine series is comprised of two engines. The 12.9-liter Paccar MX-13 engine provides efficiency and flexibility together into one, high-performance solution, and is available with ratings of 405 to 510 hp and 1,450 to 1,850 lb-ft of torque. The 10.8-liter Paccar MX-11 engine features superior performance, powerful and lightweight design, and offers ratings of 355 to 430 hp and 1,250 to 1,650 lb-ft of torque.

Both the Paccar MX-13 and Paccar MX-11 offer a B10 design life of one million miles in line haul applications. This means 90 percent of Paccar Engines will log up to one million miles without a major overhaul.

The Columbus factory began producing Paccar advanced diesel engines in 2010. Located on a 400-acre site in the Golden Triangle Industrial Park, the 450,000-square-foot factory employs more than 600 people, and produces 160 engines each day of operation, according to plant manager Walters. The plant has been a zero-waste-to-landfill facility since it was opened, and nearly 90 percent of material arrives at the plant in returnable containers.

“Employees are critical to the plant’s success with the quality, innovation, technology and care they build into every Paccar MX engine produced here,” Walters said.

Continue Reading

Trending