TheTrucker.com

Volvo Trucks celebrates 35 years of innovation and aerodynamic truck design in North America

Reading Time: 3 minutes

2018 marks the 35th anniversary of Volvo’s 1983 introduction of the Integral Sleeper, the first North American truck model to offer a modern, streamlined design and integrated sleeper compartment. With the 1983 introduction, Volvo set a new North American design standard since followed by all heavy-duty manufacturers. (Courtesy: VOLVO TRUCKS NORTH AMERICA)

GREENSBORO, N.C. — This year marks the 35th anniversary of Volvo’s introduction of the Integral Sleeper, the first North American conventional truck model to offer a modern, streamlined design and a fully integrated sleeper compartment.

“Pioneering innovations in design, fuel efficiency, driver productivity and safety have defined Volvo Trucks throughout our 90-year history,” said Magnus Koeck, Volvo Trucks North America vice president, marketing and brand management. “We’re proud of our heritage and celebrate 35 years of aerodynamic design. With the Integral Sleeper model we truly introduced a new standard and all manufacturers quickly followed suit, a trend we continue to see today with automated manual transmissions, greater integration of connectivity services to help maximize uptime, and right-sizing of engines for improved fuel efficiency and weight savings.”

Koeck  said the Integral Sleeper was the first modern conventional model to unite the cab and sleeper compartments for improved aerodynamics with seamless body-in-white construction that also allowed easy pass-through from the driving environment to the living space.

The redefined truck design further defied industry-wide design conventions of the time, introducing a hood that was six inches narrower and six inches lower at the front than at the cowl, to help reduce wind resistance, he said, adding that the Integral Sleeper aerodynamics were further boosted through a full-height roof fairing, cab side extenders, chassis fairings and trim tabs that helped air flow smoothly from the tractor to the trailer.

“Over the past year we’ve introduced the new Volvo VNR regional haul, Volvo VNL long-haul, and Volvo VNL heavy-haul tractors under the theme ‘The Shape of Trucks to Come,’ which also would have been very appropriate during the 1983 introduction of the Integral Sleeper, a model that inspired a design revolution for conventional model trucks,” Koeck said. “Each of our on-highway models, the new VNR, VNL, and VNX, bring efficiency through their streamlined shapes. Even regional haul and heavy-haul trucks spend time at highway speeds when aerodynamics become increasingly important.”

Koeck sais to complement its legendary cabs, made with high strength steel, Volvo, inventors of the three-point safety belt, became the first Class 8 truck brand in North America to designate a steering wheel-mounted driver’s side airbag as standard equipment. As active safety technologies mature Volvo has maintained a leadership role, introducing Volvo Enhanced Stability Technology (VEST), an enhanced stability system, as standard equipment for its on-highway lineup in 2007.

“Volvo aspires to zero crashes and zero injuries, helping protect drivers and all road users,” said Johan Agebrand, director of product marketing for Volvo Trucks North America. “Our global Zero Accident Vision is about helping improve safety, and mitigating these events also presents a tremendous cost savings to truck owners.”

Volvo’s July 2017 introduction of the new VNL model also brought Volvo Active Driver Assist featuring Bendix Wingman Fusion as a standard offering, making Volvo Trucks the first heavy-duty truck OEM to offer the active safety system as standard equipment, a designation also applied to the new Volvo VNR series. The system is also integrated with VEST to help drivers avoid rollover, jackknife, and loss-of-control situations on dry, wet, snow- and ice-covered roadways.

Like the conventional model design change sparked by the Integral Sleeper, Volvo also ushered in a shift in transmission preference in North America, Agebrand said. First to market in North America with a proprietary automated manual transmission (AMT), Volvo paved the way for AMTs to receive wide acceptance. In just over a decade since its North American introduction the Volvo I-Shift is now spec’d in more than 90 percent of  all trucks built for the market and is standard across the Volvo VNR, VNL, VNX, VHD and VAH product range.

“While we still offer manual transmissions, it’s increasingly difficult to justify their use, even for the most demanding jobs,” said John Moore, Volvo Trucks North America product marketing manager – powertrain. “We truly have an I-Shift for every application, whether it’s regional, long-haul, or even heavy loads with our 14-speed I-Shift with Crawler Gears supporting gross weights up to 225,000 lbs. Regardless of the application, the I-Shift consistently performs at its best, whether it is two hours or ten hours into a job.”

An industry innovator in factory-installed connectivity, Volvo Trucks today includes its connectivity hardware as standard equipment across its entire North American product range. The connectivity hardware provides access to Remote Diagnostics, which provides proactive diagnostics and monitoring of critical engine, transmission and aftertreatment trouble codes. Volvo also uses the standard onboard connectivity hardware in partnership with best-in-class fleet management providers. Volvo’s standard, factory-installed hardware allows customers to perform software and parameter updates over-the-air with Remote Programming, which helps improve uptime and vehicle efficiency, while reducing downtime costs.

“We’re in an exciting period when it comes to truck technology, and the speed of change is only accelerating,” said Agebrand. “It’s easy to get caught up in the technology revolution, but we must keep in mind the industry’s journey and the transformative designs and innovations that will continue to sculpt the shape of trucks to come.”

 

 

 

 

 

 

The Trucker News Staff

The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.

Avatar for The Trucker News Staff
The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.
For over 30 years, the objective of The Trucker editorial team has been to produce content focused on truck drivers that is relevant, objective and engaging. After reading this article, feel free to leave a comment about this article or the topics covered in this article for the author or the other readers to enjoy. Let them know what you think! We always enjoy hearing from our readers.

COMMENT ON THIS ARTICLE