TheTrucker.com

55 likely illegal immigrants found in tractor-trailer in San Antonio

SAN ANTONIO  — Dozens of people, including some children, were discovered in a tractor-trailer in San Antonio, The Associated Press reported. KSAT-TV reported that authorities from several agencies were called to a North Side neighborhood around 8:30 p.m. on Tuesday and found 55 people suspected of entering the country illegally in and around a tractor-trailer. Homeland Security Investigations spokeswoman Nina Pruneda confirmed that the agency is investigating. San Antonio Fire Department chief Charles Hood says all the people appeared to be in good health. “This truck was air-conditioned, thank God,” Hood said. “This truck had water. So they were hydrated.” Hood says five individuals were treated for minor injuries. They were transported to a hospital. Except for the five injured, all of the trailer’s occupants were taken to a detention center after they were searched. Hood said many of the individuals were hungry, so firefighters ordered pizza and fed the people at the scene. About 5 people had minor injuries from running from the trailer or from getting out, Hood said. He added that they were taken to a local hospital to be treated.

Bendix CVS names Michael Hawthorne president and CEO

ELYRIA, Ohio — Bendix Commercial Vehicle has appointed Michael J. Hawthorne president and CEO, as well as a member of its executive board. Hawthorne will succeed outgoing President and CEO Berend Bracht, who is also a member of the executive board and who is stepping down to take a role outside the company. Since 2012, Hawthorne has served as president and CEO of New York Air Brake (NYAB), a sister company of Bendix within the Knorr-Bremse Group. His 23-year career at NYAB includes numerous leadership roles in engineering, product development, and management. Hawthorne’s experience also includes positions with Raytheon and General Electric. Prior to his current role, Hawthorne spent a decade as director of New York Air Brake’s Train Dynamic Systems (TDS) division, where he was instrumental in driving exponential sales growth by developing a new market in energy management and establishing a culture of innovation within the division, according to Bendix Chairman Joe McAleese. TDS is considered an industry expert in train dynamics, McAleese said. Hawthorne has also delivered more than 15 technical papers in product development and been awarded more than 20 patents. As president and CEO, he expanded NYAB’s technology footprint, product portfolio, and revenue base. “Mike’s well-deserved reputation as a talented and strategic executive has been known for years to many members of the Bendix team, and we’re pleased to welcome him aboard,” McAleese said. “With his passion for ensuring a focus on strong customer relationships and support, as well as a shared belief in not just what Bendix has built, but also the promise of where we’re going, Mike will be a true and dynamic asset to our leadership team and the entire Bendix community.” McAleese, Bendix COO Carlos Hungria and Hawthorne will comprise the three-member Bendix Executive Board. “The Bendix team’s technical achievements, business growth, employee spirit, and community support are admired across Knorr-Bremse’s North American family, and I couldn’t be more honored to become a part of this outstanding and talented group,” Hawthorne said. “Berend helped to set a very strong course of achievements, and I’m truly looking forward to helping continue the Bendix legacy of safety, innovation, and customer focus.” McAleese said that under Bracht’s leadership, Bendix has continued on its solid, sustainable path for growth and continuous improvement. “His vision – complemented by strategic investment in key business areas – has ignited exciting innovations underway that mean even stronger and more effective customer solutions.” Bendix has been a member of the Munich, Germany-based Knorr-Bremse Group since 2002. Knorr-Bremse is a worldwide supplier of pneumatic braking and related safety systems for commercial vehicle and railroad applications.

Bill requiring examination, reform of HOS, ELD regulations introduced

WASHINGTON — Sens. John Hoeven, R-N.D., and Michael Bennet, D-Colo., Tuesday introduced the Modernizing Agricultural Transportation Act, bipartisan legislation they said is designed to reform the Hours of Service and electronic logging device regulations. Further, the enforcement of the ELD rule would be delayed until the reforms required under the bill are formally proposed. “Improving highway safety is an important goal, but the rules we put in place must recognize the very real challenges faced by those who haul livestock and other perishable commodities,” said Hoeven said. “Our legislation would delay enforcement while ensuring that the HOS and ELD rules are reformed with the concerns of all impacted stakeholders taken into account. That means providing a permanent, flexible solution that both strengthens safety and ensures the humane transportation of livestock.” “Our bipartisan legislation will provide Colorado’s farmers and ranchers a seat at the table to help develop sensible rules around the transportation of agricultural goods,” Bennet said. “It is important that we maintain safe roads for all, while also recognizing the unique flexibility needed for the transportation of Colorado’s agriculture products.” Specifically, the Hoeven-Bennet bill would establish a working group at DOT to identify obstacles to the safe, humane and market-efficient transport of livestock and, within one year of the group’s establishment, develop guidelines for regulatory or legislative action to improve the transportation of these commodities. The working group would be comprised of representatives from the transportation and agriculture industries, as well as the U.S. Department of Agriculture, and is required to consider: The impact, incompatibilities and other challenges and concerns of existing HOS rules and ELD rules under the Federal Motor Carrier Safety Administration on the commercial transport of livestock, insects and agricultural commodities. Initiatives and regulatory changes that maintain and protect highway safety and allow for the safe, efficient and productive marketplace transport of livestock, insects and agricultural commodities. Other related issues that the transportation secretary considers appropriate. Within 120 days of receiving the working group’s report, the bill requires the transportation secretary to propose regulatory changes to the HOS and ELD regulations, taking into account the findings and recommendations of the working group. The Modernizing Agricultural Transportation Act is supported by the National Pork Producers Council, National Cattlemen’s Beef Association, United States Cattlemen’s Association, Livestock Marketing Association, American Farm Bureau Federation, the American Honey Producers Association and the Rocky Mountain Farmer’s Union.

Preliminary May trailer orders continue positive trend

Both industry analysts that tractor commercial vehicle orders and sales say that preliminary trailer orders continued at a good pace. ACT Research’s preliminary estimate for May 2018 net trailer orders is 23,300 units with final numbers coming later in June. FTR reports preliminary May trailer orders at 21,200 continuing the traditional seasonal drop in orders, albeit at still strong levels. “Fleet investment continues at a torrid pace. Net trailer orders were up year-over-year for the 18th straight month in May. While normal seasonal patterns call for a month-over-month decline in the high teens, May net order volume was just 2 percent below April,” said Frank Maly, ACT’s director of CV transportation analysis and research. “The major factors that have been driving the market, solid freight rates and tight capacity, with the added aid of beneficial tax changes, continue to provide the fuel for this ongoing order flow,” Maly said. Year-to-date, more than 151,000 net orders have been booked, up more than 26% versus last year. “At current build rates, it appears that dry van and reefer backlogs, on average, have crossed into early 2019. Their influence pushes the industry average backlog-to-build well into December. Most vocational trailer categories appear to have backlogs that stretch into early fall,” he said. FTR said trailer orders have now totaled 335,000 units for the past 12 months. If OEM’s could build all the orders being placed, 2018 would easily be a record year, according to Don Ake, FTR vice president of commercial vehicles. However, supplier constraints on key components and fabrications are holding back production, but even so, production is robust and still expected to set a record. “At 21,000 thousand plus, this is still an impressive order total for May,” Ake said. “In 2015, May was the weakest order month and this May’s number is 30 percent higher than that.  There is a chance that May could be the lowest month this year if fleets start ordering for 2019 early.  Some OEMs are booked solid for 2018 and are soliciting orders for next year.” Ake said the capacity crunch continues and there are reports of trailer shortages by shippers. “The supply chain is getting plugged up and some full trailers are sitting at warehouses for days, waiting to be unloaded. These trailers are in effect pulled out of service in these regions causing temporary availability issues,” he said. “Shipments are being delayed in many markets and more trailers are needed to keep the freight moving.”              

Pilot Flying J opens four new locations

KNOXVILLE, Tenn. — Pilot Flying J will open four Pilot Travel Centers in Bunkie, Louisiana, Cedar Rapids, Iowa, Monument, Colorado and Hempstead, Texas, throughout the month of June. The travel centers feature full amenities for area residents and the traveling public, while adding 205 truck parking spaces, approximately 220 local jobs and other economic benefits to the communities. “We’re thrilled to serve the communities of Bunkie, Cedar Rapids, Monument and Hempstead with the expansion of our travel center network this month to deliver convenience, quality, great service and added value to local residents and professional drivers traveling the nation’s highways,” said Ken Parent, president of Pilot Flying J. “Our goal at Pilot Flying J is to connect people and places with comfort, care and a smile at every stop. The addition to our footprint of 4 new locations will bring the best service and amenities available on the road to travelers passing through these areas.” The Pilot Travel Centers offer many amenities, including: Pilot Travel Center #1105, 7349 LA-29, Bunkie, Louisiana — PJ Fresh, Subway, 52 truck parking spots, eight diesel lanes and eight gas fueling positions, four showers, public laundry, CAT scale and Western Union. Pilot Travel Center #1092, 8950 Earhart Lane, Cedar Rapids, Iowa —PJ Fresh, Dunkin Donuts Express, Arby’s, 35 truck parking spots, six diesel lanes and 10 gas fueling positions, three showers, public laundry, CAT scale, Western Union and a driver’s lounge. Pilot Travel Center #1110, 15455 Terrazzo Drive, Monument, Colorado — PJ Fresh, Dunkin Donuts Express, Arby’s, 72 truck parking spots, eight diesel lanes and 12 gas fueling positions, five showers, public laundry, CAT scale, Western Union, driver’s lounge. Pilot Travel Center #573, 2000 Farm to Market Road 488, Hempstead, Texas — PJ Fresh, Dunkin Donuts Express, Subway, 46 truck parking spots, eight diesel lanes and 16 gas fueling positions, four showers, public laundry, CAT scale and Western Union. The new facilities will bring Pilot Flying J’s network of stores in Louisiana to 11 locations; Iowa to 18 locations; Colorado to six locations; and Texas to 77 locations. Cumulatively, the new travel centers are expected to contribute $11.4 million annually in state and local tax revenues and will grow Pilot Flying J’s footprint to 791 locations. Parent said Pilot Flying J guests could make the most out of their experience by saving time and money with the myPilot app. Using the myOffers feature in the app, guests can save in-store with valuable weekly deals on food and beverages. MyPilot app users also have access to trip planners and features for professional drivers including mobile fueling, parking and shower reservations. The combined network of more than 750 Pilot and Flying J Travel Centers across North America serves more than 1.6 million customers daily. For more information on Pilot Flying J, visit www.pilotflyingj.com.

NATSO launches Alternative Fuels Council, unveils fuel quality program

ALEXANDRIA, Va. – NATSO, the national association representing the travel plaza and help fuel retailers leverage the resources necessary to learn about and incorporate alternative fuels into their supply offerings. The Alternative Fuels Council will work with members of the truckstop and travel plaza community and other fuel retailers to navigate the litany of state and federal fuel regulations, and to utilize available government incentives for alternative fuels, including the Renewable Fuel Standard (RFS). The Alternative Fuels Council will also help its partners implement profitable strategies related to alternative fuel supply options and fuel infrastructure. “The Alternative Fuels Council is designed to satisfy our industry’s need for expert, convenient and cost-effective solutions that help fuel retailers bring alternative fuels to market,” said NATSO President and CEO Lisa Mullings. “The alternative fuels market is an important growth opportunity for many fuel retailers nationwide; and both the fuel retailing industry and their customers will benefit from the collective resources and benefits of this endeavor.” Among its initial offerings, NATSO’s Alternative Fuels Council today unveiled a new Biodiesel Fuel Quality Plan designed to help those who blend, market, and distribute biodiesel blends ensure the final product that they sell to consumers meets a minimum standard of quality. As part of this plan, the Alternative Fuels Council will help facilitate fuel testing and analysis for marketers. “Maintaining fuel quality is increasingly important to today’s fuel retailers amid the growing number of fuel offerings and renewable fuel blending options,” said NATSO Fuel Specialist Jeff Hove. “While certain accreditation and quality assurance can be provided by biodiesel producers and suppliers, it is imperative that fuel retailers remain vigilant regarding the quality of the finished product.” As NATSO’s Fuel Specialist, Hove will be the primary liaison between the Alternative Fuels Council and its fuel retailing partners. Through the Fuel Quality Program, those who blend, market and distribute biodiesel can access a step by step guide to the blending process. The guide directs users through fuel quality management, including sampling procedures, protocols and proposed schedules, to help ensure that alternative fuel meets the required ASTM fuel quality standards. To learn more about the Alternative Fuels Council and the Biodiesel Fuel Quality program visit NATSOAltFuels.com and read a one-pager here.      

Wabash names Brent Yeagy as president and CEO

LAFAYETTE, Ind. —  Wabash National Corp., a producer of semi-trailers and liquid transportation systems, said that Brent L. Yeagy, president and chief operating officer of the company, has assumed the role of president and CEO. Yeagy follows Richard J. Giromini, who stepped down from his role as Chief Executive Officer on June 1 as part of a planned succession announced on December 15, 2017. “On behalf of the board of directors, I extend my sincere gratitude and admiration for Dick’s many contributions in his 11 years as CEO,” said Dr. Martin Jischke, chairman of the board. “As CEO, Dick changed Wabash National from being primarily a dry van manufacturer to the growing, diversified manufacturer it is today. The board is confident that Yeagy — a talented, energetic and experienced leader — will build on the foundation Dick put in place and carry Wabash National’s legacy of innovation and growth into the future.” Yeagy has been with Wabash National for more than 15 years, most recently serving as president and COO since October 1, 2016. Yeagy joined Wabash National in 2003 and held a number of positions with increasing responsibility, including vice president of manufacturing, vice president and general manager – commercial trailer products, and senior vice president and group president – commercial trailer products. Prior to Wabash National, from 1999 to 2003 Yeagy held various positions within human resources, environmental engineering and safety management for Delco Remy International. He served in various plant engineering roles at Rexnord Corp. from December 1995 through 1999. He also served in the United States Navy from 1991 to 1994. “I’m honored and humbled to be named the president and CEO,” Yeagy said. “I’m fortunate to have spent the last 15 years at Wabash National under the leadership of Dick Giromini. He created a strong foundation. The next chapter at Wabash National will capitalize on the pillars Dick implemented: focus, lean manufacturing, company culture, and a strategic plan for growth and diversification. In the spirit of continuous improvement that Dick brought to Wabash National, we will now shift toward acceleration of our strategy as we look to provide greater value for all of our stakeholders.” Giromini will remain with the company serving in the role of executive advisor through June 1, 2019, following which he will retire.

DTNA adds 2 connectivity services to its Connect portfolio

PORTLAND, Ore. — Daimler Trucks North America (DTNA) has introduced two new connectivity services into its Detroit Connect portfolio — Detroit Connect Direct and a wireless in-cab device connection. Exclusive to the new Freightliner Cascadia spec’d with Detroit engines, the new services will expand communication and reporting capabilities and provide deeper insights for customers, according to Jason Krajewski, director of connectivity for DTNA. Detroit Connect Direct provides fleets with direct access to critical information such as vehicle location, fault codes and diagnostics, fuel performance, safety data and driver behavior, he said. With Detroit Connect Direct, customers can select which data sets they want, how much and how frequently they would like that data made available so it can be imported into their backend systems. “In addition to the vehicle-centric services we provide today, we understand that our customers have different business requirements as well as a variety of roles in their business that need accurate and timely information to help them perform their daily functions effectively,” Krajewski said. “Detroit Connect Direct is all about empowering our customers by providing on-demand information they can tailor to meet their specifications and allow them to run their business more efficiently and profitably.” The proprietary Detroit Connect platform will also link wirelessly with an in-cab device via Bluetooth, which allows Hours of Service data to be delivered to Detroit Connect authorized electronic logging device apps, providing the necessary information required from the vehicle to meet the federal ELD regulations without the need for any additional pieces of hardware. “We are streamlining the ability for customers to receive critical information such as vehicle performance and hours of service reporting,” Krajewski said. “The Detroit Connect platform continues to enhance the benefits our customer can achieve through vehicle connectivity.” The Detroit Connect platform also enables over-the-air engine parameter changes and extraction of engine reports. These latest innovations reinforce DTNA’s overall commitment to delivering connected vehicle services. Krajewski said DTNA was the first truck OEM to offer remote diagnostics services with the introduction of Detroit Connect Virtual Technician more than seven years ago. “This innovative technology gives customers new insights into engine, transmission and aftertreatment fault events and is available on all Detroit engines, including the Detroit DD5 and DD8, across all DTNA truck models. The access to this vital information helps customers improve uptime, and their bottom lines. Detroit Connect services also include remote updates and analytics, which can all be accessed through the Detroit Connect portal. Detroit Connect remote updates are exclusive to the new Freightliner Cascadia and enable customers to securely make over-the-air engine parameter changes and download Detroit Diesel Engine Control (DDEC) performance reports for one or more trucks. The cellular-based Remote Updates can be easily implemented via the Detroit Connect portal. Fleet managers no longer have to wait for their vehicles to be brought in to the shop to change key parameters on their vehicles. They can quickly and easily make parameter updates at a time convenient for the fleet. With Detroit Connect analytics, fuel managers no longer need to pull data from various sources to determine how their vehicles are performing. Detroit Connect analytics, through a dedicated section of the Detroit Connect portal, automatically translates critical fuel consumption and/or safety data into interactive and easy-to-understand reports that provide actionable insights for increased vehicle and fleet performance. “Since the launch of our remote diagnostics service – Detroit Connect Virtual Technician – we have sought new opportunities for customers to interact with data on their terms, in ways that meet their needs.” Krajewski. “DTNA will continue to lead innovation through advanced, customer-focused solutions that have a measurable impact on their business.” For more information go to www.DemandDetroit.com/Connect.

One good toll deserves another? Virginia, Maryland team up

WASHINGTON — The Journal of the American Association of State Highway and Transportation Officials (AASHTO) reports that following Maryland’s plans to add toll lanes to the entire length of the Capital Beltway within its borders, Virginia is now considering extending its existing Beltway toll lanes northward to the Maryland line. The idea is to lengthen the I-495 Express Lanes in Virginia by about 3 miles, from the Dulles Toll Road interchange to the American Legion Bridge, the Journal article stated. The project will be developed in conjunction with Maryland’s to ensure they are compatible, but Virginia’s plan will also be able to stand alone, according to the Virginia Department of Transportation. VDOT launched a $6 million environmental study of its project in April. The study is expected to be finished in late spring of next year, after a public hearing planned for early spring.

ALK Technologies launches new trip planning driver app

PRINCETON, N.J. —  ALK Technologies, a Trimble Company and global provider of transportation technology and mobility solutions, has launched a trip planning driver app—MileOn by PC*MILER. Powered by ALK’s flagship PC*MILER routing, mileage and mapping software, the new app gives drivers a much-needed tool for trip planning, scheduling Hours of Service breaks and choosing the right rest stops for their needs while staying DOT compliant. “Although dispatchers and planners have been utilizing PC*MILER for years to generate routes, miles and reports, this technology, hasn’t been available for drivers to use — until now,” said Bill Maddox, vice president of PC*MILER. “MileOn by PC*MILER is taking some of these tools from the back office and putting them right into the hands of drivers to give more control over how they plan their trips.” MileOn by PC*MILER takes a driver’s available HOS, schedule and trip preferences in order to generate intelligent, route-specific rest stop suggestions, Maddox said. Drivers will have the choice to stop at different truck stops and rest areas based on location, available hours and important available amenities, such as showers. Once drivers select their desired stop, MileOn by PC*MILER will update the trip plan so that they know exactly where to go. Not only will this help drivers maximize HOS, but it can also improve overall customer service by helping them to achieve delivery windows. The app is designed to help drivers stay compliant and plan trips with breaks at preferred rest stops along the way, Maddox said, adding that it also includes integrated real time traffic and weather alerts up to 48 hours in advance to help keep drivers informed of traffic and constantly changing roads and weather conditions that may impact trip planning. “If you’re going to head into a thunderstorm or a blizzard somewhere on your trip, we’re going to tell you where that’s going to be so you can plan better,” Maddox said. “A driver can choose to route around the area or even take a rest break in advance of the inclement weather.” The MileOn by PC*MILER app is available to Android users in both free and paid versions. The paid version of the app includes additional features, such as sophisticated HOS planning. For more information about MileOn by PC*MILER, visit www.mileonapp.com.

5 states awarded grants to combat drugged driving

WASHINGTON, D.C. — For the third consecutive year, the Governors Highway Safety Association (GHSA) and the Foundation for Advancing Alcohol Responsibility (Responsibility.org) are awarding grants to help states combat the growing challenge of drug-impaired driving. In 2018, five states — Idaho, Minnesota, New York, Rhode Island and Vermont — will receive nearly $100,000 to provide advanced training, information and skills to detect drivers under the influence of drugs. This year’s grants come on the heels of a new report from GHSA and Responsibility.org examining the impact of marijuana and opioids on traffic safety. The report finds that 44 percent of fatally-injured drivers with known test results were positive for drugs in 2016, up from 28 percent a decade prior. To combat these alarming statistics, the report recommends increased training for law enforcement and better tools to assess drug impairment. New York is taking a unique approach to this grant by developing a first-of-its-kind training on oral fluid testing in drug-impaired driving cases. The training, which will occur June 14 and 15, is geared toward not only law enforcement but also prosecutors and toxicologists, bringing traffic safety partners together to encourage use of oral fluid testing in the state’s drugged driving investigations. “The lack of a universally-accepted testing method for drug impairment makes it difficult to understand the full scale of the drugged driving problem,” said GHSA Executive Director Jonathan Adkins. “Integrating oral fluid testing has tremendous potential to improve detection, and we hope New York’s training will serve as a model for other states to take this step.” Through this funding, four other states will train more than 500 officers in advanced drug-impaired driving recognition. Idaho’s grant will support three Drug Recognition Expert (DRE) courses and an Advanced Roadside Impaired Driving Enforcement (ARIDE) course, while Rhode Island plans to hold two ARIDE courses in 2018 and an additional four in 2019. Meanwhile, Vermont plans on expanding its existing DRE and ARIDE training programs to reach a larger number of law enforcement officers. Minnesota will focus its funds on providing DRE training across a larger geographic area to maintain sufficient coverage throughout the state. “Law enforcement officers are our boots on the ground when it comes to ending impaired driving,” said Ralph Blackman, President and CEO of Responsibility.org. “More frequently we’re seeing drivers not only impaired by one drug but by multiple drugs or both drugs and alcohol. We need to make sure officers are able to detect and evaluate these drivers, which is why Responsibility.org is proud to continue supporting state efforts to expand and enhance training.” Twelve states and territories applied for these competitive grants. To date, this partnership has trained more than 1,000 officers in drug-impaired driving detection. A selection committee comprised of law enforcement and drug-impaired driving experts from around the country reviewed the applications and determined the winners. For more information on the grants and previous state program results, visit ghsa.org/resources/partner-initiatives/FAAR.      

ATA, Rhode Island truck group vow to fight state’s truck tolls

  ARLINGTON, Va. — Leaders of the American Trucking Associations and the Rhode Island Trucking Association (RITA) today pledged to continue fighting against what they called “the state of Rhode Island’s predatory and discriminatory truck-only toll scheme.” The state last week announced that two of its long-delayed truck tolls would go online today. The rest of the 14 tolls should be activated over the next 18 months. “By pressing ahead with her ill-conceived RhodeWorks scheme, Gov. Raimondo is violating the Constitution by interfering with interstate commerce,” said ATA President and CEO Chris Spear. “She and her administration were warned of this repeatedly by the trucking industry and we will continue to fight these unjust tolls by any means available.” Trucks make up just over 2 percent of the traffic on the highways being tolled under Rhode Island’s plan, and to place 100 percent of the burden for maintaining the state’s roads and bridges on those trucks will hurt Rhode Islanders and the entire New England region, stated an ATA news release. “By imposing these tolls, Gov. Raimondo and her profiteering allies in Providence are needlessly inflicting economic pain — 94 percent of the costs of these tolls will ultimately be borne by Rhode Island businesses — and worsening our state’s congestion problems as study after study has shown that when new tolls are imposed, traffic simply diverts away from them — thus taking traffic off of the interstates and putting it on Main Street,” said RITA President Chris Maxwell. “Tolls are as inefficient, with as much as 30 percent of revenue collected going to government overhead, as they are unsafe — putting needless choke points on our highways and pushing traffic off of larger, safer highways and on to smaller arterials,” Spear said. “Trucking is willing to pay our fair share — to pay more than we do now — for good roads and bridges. What we are not willing to do is foot the bill alone for an ill-conceived and illegal highway funding program that ultimately will become an unwatched slush fund for the governor’s office. “We warned Gov. Raimondo about heading down this road and it is unfortunate that she has chosen to attack our industry in this way,” he said. “We continue to explore all avenues — including the courts — to get this decision reversed and she and her administration should expect us to continue to fight for fair and equitable highway funding in Rhode Island.”

Ohio to start drone project in July in conjunction with its Smart Mobility Corridor

Drones are set to monitor traffic patterns and communicate with ground vehicle infrastructure in Ohio, the American Association of State Highway and Transportation Officials Journal reports. The drones will be relaying information on what’s going on along Ohio’s Smart Mobility Corridor, a 35-mile public testing ground on U.S. Route 33 for new transportation technologies. As part of the project, Ohio is upgrading the Route 33 testing corridor with road sensors and putting devices on more than 1,000 vehicles. The drones will interact with the senors and fixed-location traffic cameras, sending information to the existing ground traffic management system. Scheduled to begin July 1, the project will help “explore the intersection between autonomous and connected vehicles on land and in the air,” said DriveOhio Executive Jim Barna. Pilots will operate the aircraft beyond their visual lines-of-sight as part of a national drone system project. The AASHTO Journal reported a StateScoop story on the project, which has been under way in Ohio since 2016. The drone project is a partnership between the DriveOhio UAS Center in Springfield and the Ohio State University College of Engineering. Fred Judson, director of the DriveOhio center, said the research project will pave the way for a safety system allowing the eventual development of package delivery and air taxi services in the future.  

Port imports expected to set record numbers despite tariff debate

WASHINGTON — Imports at the nation’s major retail container ports are expected to set record numbers this summer and fall even as the debate over trade and tariffs continues in Washington, according to the monthly Global Port Tracker report released today by the National Retail Federation and Hackett Associates. “Consumers are buying more and that means retailers are importing more,” NRF Vice President for Supply Chain and Customs Policy Jonathan Gold said. “Imports continue to be the primary source of high-quality, mass-produced necessities at affordable prices and will be for the foreseeable future. If tariffs are imposed on consumer goods, that will only drive up prices for American families while doing little or nothing to punish those responsible for unfair trade practices.” “Despite an environment where the U.S. administration is enacting measures that could well lead to a trade war with most of its Asian and European trading partners, we see imports continuing to grow,” Hackett Associates Founder Ben Hackett said, noting that manufacturers have seen increased orders that reflect solid consumer demand. “This suggests that neither industry nor consumers really believe that President Trump will push through with his proposed tariffs. Let’s hope that they are right.” Ports covered by Global Port Tracker handled 1.63 million Twenty-Foot Equivalent Units in April, the latest month for which after-the-fact numbers are available. That was down 5.8 percent from March and up 0.3 percent year-over-year. A TEU is one 20-foot-long cargo container or its equivalent. May was estimated at 1.77 million TEU, up 1.3 percent year-over-year. June is forecast at 1.78 million TEU, up 3.7 percent; July at 1.88 million TEU, up 4.1 percent; August at 1.91 million TEU, up 4 percent; September at 1.83 million TEU, up 2.3 percent; and October at 1.9 million, up 5.7 percent. The numbers forecast for July, August and October would each beat the previous record of 1.83 million TEU imported during a single month, which was set in August 2017. The first half of 2018 is expected to total 10.2 million TEU, an increase of 3.8 percent over the first half of 2017. The total for 2017 was 20.5 million TEU, up 7.6 percent from 2016’s previous record of 19.1 million TEU. Global Port Tracker, which is produced for NRF by the consulting firm Hackett Associates, covers the U.S. ports of Los Angeles/Long Beach, Oakland, Seattle and Tacoma on the West Coast; New York/New Jersey, Port of Virginia, Charleston, Savannah, Port Everglades, Miami and Jacksonville on the East Coast, and Houston on the Gulf Coast. The report is free to NRF retail members, and subscription information is available at www.nrf.com/PortTracker or by calling (202) 783-7971. Subscription information for non-members can be found at www.globalporttracker.com. The National Retail Federation is the world’s largest retail trade association. Based in Washington, D.C., NRF represents discount and department stores, home goods and specialty stores, Main Street merchants, grocers, wholesalers, chain restaurants and internet retailers from the United States and more than 45 countries. Retail is the nation’s largest private-sector employer, supporting one in four U.S. jobs — 42 million working Americans. Contributing $2.6 trillion to annual GDP, retail is a daily barometer for the nation’s economy. Hackett Associates provides expert consulting, research and advisory services to the international maritime industry, government agencies and international institutions.

Driver turnover rate rises in first quarter

ARLINGTON, Va. — Today, American Trucking Associations Chief Economist Bob Costello said the driver turnover rate at large truckload carriers rose in the first quarter of 2018. “The uptick in turnover is consistent with continued tightness in the market for drivers,” Costello said. “Anecdotally, carriers continue to struggle both recruiting and retaining quality drivers – leading to increasing wages. The tight driver market should continue and will be a source of concern for carriers in the months ahead.” According to ATA’s Trucking Activity Report, the annualized turnover rate at large truckload carriers – fleets with more than $30 million in annual revenue – jumped six points to 94 percent. The increase set turnover at these carriers 20 percentage points higher than in the first quarter of 2017. The turnover rate at less-than-truckload carriers rose two points to 10 percent. At smaller truckload carriers, the turnover rate sunk to 73 percent, but was still seven points higher than for the same period the previous year. “Turnover is not a measure of the driver shortage, but rather of demand for drivers,” Costello said. “We know that as freight demand continues to rise, demand for drivers to move those goods will also rise, which often results in more driver churn or turnover. Finding enough qualified drivers remains a tremendous challenge for the trucking industry and one that if not solved will threaten the entire supply chain.”

Freightliner shows off 2 fully electrified CMVs during event

PORTLAND, Ore. — Freightliner Trucks premiered two fully electrified commercial vehicles, a Freightliner eCascadia heavy-duty truck and a Freightliner eM2 106 medium-duty truck today, during the Daimler Trucks Capital Market and Technology Day here. Freightliner plans to deliver an Electric Innovation Fleet of 30 vehicles to customers later this year for further testing under real-world operating conditions. Both electrified Freightliner models are designed to fit specific applications, carefully identified through an extensive co-creation process with customers. The goal is to build and deliver commercial electric vehicles that support the business and sustainability goals of our customers. The eCascadia has up to 730 peak horsepower. The batteries provide 550 Kwh usable capacity, a range of up to 250 miles and have the ability to charge up to 80 percent (providing a range of 200 miles) in about 90 minutes. The Class 8 tractor is designed for local and regional distribution and drayage. The eM2 has up to 480 peak horsepower. The batteries provide 325 Kwh of usable capacity, a range of up to 230 miles and have the ability to charge up to 80 percent (providing a range of 184 miles) in about 60 minutes. The eM2 is Freightliner’s electrified solution for local distribution, pickup and delivery, food and beverage delivery, and last-mile logistics applications. The announcement comes as Daimler Trucks North America (DTNA) explores proprietary solutions to meet the most promising target applications for electrified commercial vehicles, with the goal of starting production in 2021. “The Freightliner eCascadia and eM2 are designed to meet customer needs for electrified commercial vehicles serving dedicated, predictable routes where the vast majority of daily runs fall between 45 and 150 miles,” said Roger Nielsen, president and chief executive officer of DTNA. “These innovative trucks reflect DTNA’s commitment to bring practical, game-changing technology to market. The eCascadia, utilizing North America’s bestselling Class 8 platform, and eM2 106, based on one of the most in-demand medium-duty truck designs, are built on validated, series production trucks in extensive use by our customers every day.” The Freightliner eCascadia with 80,000 lb. gross combined weight rating (GCWR) and eM2 with 26,000 lb. GCWR are part of Daimler Trucks’ global electrified truck initiative. The Mercedes-Benz eActros, with a range up to 124 miles and a 55,000 lb. GCWR, is now entering testing for distribution applications with customers in Europe, while the E-FUSO Vision One, a Class 8 concept truck in Japan with a range of 220 miles and a 51,000 lb. GCWR, gives an outlook on the electrification of the Fuso portfolio. The FUSO eCanter, a light-duty truck, is already available in series model production as a fully electric truck from Daimler Trucks. “Our primary goal at DTNA is bringing vehicles to market that are safe, reliable and efficient. Heavy-duty electric vehicles present the greatest engineering challenges, but they also are the best learning laboratories,” Nielsen said. “We have decades of experience in successfully producing durable commercial vehicles in high volumes that stand up to the demands our customers place on them. We now bring this unmatched experience and expertise to the electric truck category.” “DTNA is striving to develop electric commercial vehicles that reduce emissions and enhance our customers’ bottom lines through improved uptime and lower operating costs,” said Richard Howard, senior vice president, sales and marketing, Freightliner Trucks. “With the largest dealer and service network in North America, we will offer unparalleled access to factory-trained technicians, parts and support. We will leverage this network to support the Freightliner Electric Innovation Fleet and, as more electric commercial vehicles are delivered to our customers, we will provide the superior support they expect from Freightliner.” DTNA understands the success of electric commercial vehicles requires extensive knowledge and support on the infrastructure side, and is leading the initiative to develop a commercial vehicle charging infrastructure for North America. Daimler AG, DTNA’s parent company, is a founding member of CharIN, the Charging Interface Initiative – an effort to develop a standard charging system for battery-powered vehicles. DTNA is heading a CharIN taskforce to develop a new electric commercial vehicle charging standard globally, collaborating with utilities and service providers to foster a supportive environment for high-voltage charging networks and serve as a trusted consultant for customers. Martin Daum, member of Daimler Board of Management for trucks and buses: “We are the undisputed global leader of the trucking industry and we want to remain in that position also with regards to electric trucks. We were first-movers on electric trucks and we strive to provide the leading electric truck in each relevant segment. With the foundation of the global ‘electric mobility group’, we maximize the impact of our investments in this key strategic technology field. Thus, we can go for the best solutions in batteries, charging solutions and energy management.” The eCascadia and eM2 join the Thomas Built Buses all-electric Saf-T-Liner C2 JouleyTM school bus and the FUSO eCanter to establish Daimler Trucks as the leader in North America with the widest range of commercial electric vehicle models. “DTNA’s electric truck initiative is a direct result of the global collaboration at Daimler,” said Frank Reintjes, member of the divisional board, Daimler Trucks. “We are shaping the future of road transportation, and no matter the drivetrain, we strive to be the undisputed global market leader in commercial vehicles – always focusing on the real needs of our customers. At the same time, we create valuable synergies for Daimler Trucks.” Daimler Trucks commercial electric vehicles breakthroughs already entering the market include: Thomas Built Buses Saf-T-Liner C2 electric school bus, Jouley, with a range of up to 100 miles that starts limited production in 2019. More than 100 electric vehicles built by Freightliner Custom Chassis Corp. in 2012 with supplier Electric Vehicles International (EVI) on the MT-55 walk-in van chassis are still on the roads today. The FUSO eCanter, a fully electric Class 4 light-duty truck in series production with electric urban delivery vehicles being delivered to various customers in North America, Asia and Europe. The fully electric Mercedes-Benz Citaro is based on the global bestseller Mercedes-Benz Citaro, going into series production in late 2018. The Mercedes-Benz eActros is a fully electrified heavy-duty distribution truck starting operations with the first customers in the second half of 2018. Daimler Trucks North America LLC, headquartered in Portland, Oregon, is the leading heavy-duty truck manufacturer in North America. Daimler Trucks North America produces and markets commercial vehicles under the Freightliner, Western Star and Thomas Built Buses nameplates. Daimler Trucks North America is a Daimler company, the world’s leading commercial vehicle manufacturer. Freightliner Trucks is a division of Daimler Trucks North America LLC, headquartered in Portland, Oregon, and is the leading heavy-duty truck manufacturer in North America. Daimler Trucks North America produces and markets Class 5–8 trucks.

Daimler creating automated truck research & development center

PORTLAND, Ore. — Daimler Trucks Wednesday said it was creating an Automated Truck Research and Development Center at Daimler Trucks North America (DTNA) headquarters on Swan Island in Portland, where DTNA already has a significant research and development presence, including a full-scale heavy-duty truck wind tunnel on Swan Island and the High Desert Proving Grounds nearby in Madras, Oregon. The center will be dedicated to further developing automated driving technology and understanding its impact on society and benefits for customers, the company said in a news release. Engineers there will draw on research and development resources from Daimler Trucks locations in Stuttgart, Germany, and Bangalore, India, to form a global network of hundreds of engineers devoted to the topic of automated driving, leveraging the experience and knowledge from previous research performed across Daimler’s vehicle divisions, including passenger cars, according to Roger Nielsen, president and CEO of Daimler Trucks North America. The three locations will work very closely together, while R&D activities on automated trucks in Germany will also be expanded to expedite and deepen the company’s efforts in this field. The research center was announced during Daimler Trucks Capital Market and Technology Day, which attracted global journalists and investors. The new facility is part of the company’s plans to invest more than $2.943 billion in total research and development activities in 2018 and 2019 with more than $588 million of that earmarked for e-mobility, connectivity and automated commercial vehicle technology. “We are pioneering technologies across the automated vehicle spectrum that make roads safer and help trucking companies boost productivity,” said Sven Ennerst, head of truck product engineering, global procurement, and Daimler Trucks China. “This center of excellence is part of our global innovation network and supports the Daimler Trucks ethos of rigorously testing new technologies, ensuring systems are developed safely and functionality is fully validated before it is released to customers.” Daimler Trucks believes that fully autonomous – driverless – commercial trucks will not be series produced in the near future; however, the technology has the potential to create numerous advantages for the global logistics industry by helping fleets to keep up with ever-increasing freight demands as the pool of long-haul truck drivers continues to decrease, Errerst said. “The focus for Daimler Trucks is to carefully study all requirements for highly automated driving, to ensure any technology brought to market will improve road safety and driver productivity, while enhancing commercial vehicle performance, reliability and uptime for the customer,” he said. The center will focus its activities on all aspects of development, testing, and validation necessary for high levels of automation. This includes software, sensors, machine learning, and simulation, as well as the necessary adaptation of the base vehicle platform. The Automated Truck R&D Center will furthermore be established as a center for co-creation, where customers, suppliers, and business partners can provide input, ensuring the technology is calibrated to real-life applications. “Our approach to developing highly automated driving technology will draw upon our proven expertise and long history of commercializing safe, reliable, and fully integrated commercial vehicles,” Nielsen said. “We are again aiming for a fully integrated, proven Daimler solution that will provide the best tool for our customers’ needs.” Nielsen continued, “We can accomplish this with a combination of vehicle road testing over millions of miles around the globe and advanced simulation. The global collaboration that takes place among research and development teams at Daimler extends to vans, buses and passenger cars, and each advancement is a building block for the future of automated vehicles.” Daimler Trucks has a well-established track record of developing automated driving technologies, beginning with active safety systems that have achieved strong market penetration, Neilsen said. The Detroit Assurance 4.0 suite of safety systems, for example, forms the basis of the sensor systems that will ultimately be used in highly automated applications. One recent development out of the area of automated truck driving, platooning (known as pairing when two vehicles are used), was demonstrated with paired trucks as part of the Daimler Trucks Capital Market and Technology Day at Portland International Raceway. Using the sophisticated radar and camera sensor systems currently available as part of Detroit Assurance, along with vehicle-to-vehicle (V2V) communications and Advanced Driver Assistance Systems (ADAS), braking is coordinated across platooned vehicles and steering is partially automated to keep the trucks in the center of their lanes. The following trucks in the platoon respond to braking commands in less than three tenths of a second – significantly faster than a human can react – which allows for close following distances. The platooning demonstration illustrates the safety and fuel efficiency benefits the company delivers through its automated technology leadership. The first real-world operation testing of platooning in the U.S. is in preparation. DTNA is working with top customers on the technology to validate the practicality of hauling commercial freight with platooned vehicles, the news release said.  

TA taking nominations for 2019 Citizen Driver; ceremonies set for 2018 honorees

WESTLAKE, Ohio —  TravelCenters of America (TravelCenters), operator of the TA and Petro Stopping Centers travel center brands, is now accepting nominations for the 2019 Citizen Drivers. The program, launched in 2013, is designed to recognize professional drivers who evoke public respect for the truck driving profession through good citizenship, safety, community involvement, health and wellness, and leadership. Anyone — fleet owners and executives, co-workers, friends, family members, trucking organization members, trucking industry customers — may nominate a professional driver for the honor. Nomination forms, rules and other information can be found at www.ta-petro.com/citizendriver. Nominations will be accepted through September 30, 2018. The 2019 Citizen Driver honorees will be announced at a special ceremony. Over the course of five years, there have been 31 Citizen Drivers and each have had the TA-Petro site of their choice named after them in their honor. “We always enjoy this time of year, when the nomination period opens in search for our next set of Citizen Drivers,” said Barry Richards, President and COO of TravelCenters. “We encourage everyone that knows or works with professional drivers to think about who stands out and nominate them. It’s an honor, every year, to get to know the nominees and to read the stories that have made an impact on the people they interact with every day.” TA has released the dates and time where the 2018 Citizen Drivers will be honored; June 20, 6:30 p.m. — Danny & Cindy George — TA Wheat Ridge, Colorado — “Danny & Cindy George Wheat Ridge Travel Center” June 22, 1 p.m. — Ingrid R. Brown — Petro Oklahoma City  — “Ingrid R. Brown Oklahoma City Stopping Center” July 6, 1 p.m. — Carol Wolder-Nixon —  TA North Bend, Washington  —  “Carol Wolder-Nixon North Bend Travel Center” July 7, 1 p.m. — Roland Bolduc —  TA Branford, Connecticut  —  “Roland Bolduc Branford Travel Center” Each honoree will be featured in The Trucker in the coming months.    

Truck orders still ‘hot,’ volume could continue into next year, analysts say

Two organizations that report truck orders have said the latest data indicates that the new truck market is still strong. ACT Research said its preliminary North America Class 8 net order data show the industry booked 35,600 units in May. FTR reports that preliminary North American Class 8 orders for May continue to show exceptional strength, coming in at 35,200 units. “Preliminary net order data indicate that demand for Class 8 trucks continued in robust fashion in May,” said Kenny Vieth, ACT’s president and senior analyst. “During the month, North American Class 8 net orders rose 2.5 percent from April, and May’s order volume more than doubled the year-ago take, rising 110 percent from last May. “Seasonal adjustment begins to inflect positively this month. When adjusted, May’s Class 8 net order volume rises to 39,800 units.” Seasonally adjusted and annualized, Class 8 orders have been booked at a 475,000 unit rate through year-to-date May. FTR said the 35,200 units represented the third highest May on record. Orders have averaged morethan 40,000 units for the past six months, volumes never seen before in the industry. FTR said Class 8 orders exceeded expectations again as fleets order in huge numbers attempting to keep up with burgeoning freight demand. North American Class 8 orders for the past 12 months have now totaled 386,000 units. “This is the tightest capacity crunch ever. Long-time veterans in this industry are saying this is the best freight market they have ever seen. Fleets cannot add capacity fast enough and as long as the economy and manufacturing are going great, this capacity crisis will continue,” said Don Ake FTR’s vice president of commercial vehicles. “There is a shortage of truck parts and components, so OEMs have been slow to deliver. This just exacerbates an already bad situation. Fleets are now grabbing every available build slot, hoping to get some more trucks by the end of the year. Some orders now are even spilling into the first quarter of next year. It is a red-hot market.” In a related development, CFI, a North American full-truckload carrier and subsidiary of TFI International Inc., said it has increased its 2018 fleet purchase plan from 500 to 600 new Kenworth T680 over-the-road long-haul tractors. Delivery of the additional 100 tractors is expected by year end. The additional new tractors represent the latest investment in a two-year modernization program, begun in 2017, that by the end of this year, will have replaced 65 percent of CFI’s North American power fleet with the new Kenworth tractors. CFI operates 1,897 company-owned power units and 7,365 53-foot dry-van trailers, and employs about 350 owner-operators. “This investment is good news for our customers as well as our professional drivers,” said Greg Orr, CFI’s president. “We are accelerating our program to refresh and modernize our fleet with one of the most advanced power units on the market, which features excellent fuel economy and the latest safety systems.” Orr noted that drivers will enjoy operating new equipment that has many of the most-requested driver comfort features available, as well as a reputation for reliability, minimizing downtime and maximizing driver miles and pay. For the customer, the new assets support CFI’s mission to provide superior service that is ultimately safe and reliable, consistently delivering shipments on-time, he said. The company expects to begin taking delivery of the new tractors this summer and will concurrently retire older units as new ones enter the fleet through the end of the year.  

Roadcheck 2018 begins today with focus on HOS violations

GREENBELT, Md. — It’s here. Starting today commercial motor vehicle inspectors will conduct high-volume, high-visibility inspections of large trucks and buses for 72 hours as part of the Commercial Vehicle Safety Alliance’s (CVSA) International Roadcheck annual enforcement initiative. Commercial motor vehicles and their drivers will be checked at inspection sites, weigh stations and roving patrol locations along major roadways in Canada, Mexico and the United States. Each year, International Roadcheck places special emphasis on a category of violations. This year’s focus is on Hours of Service compliance. While checking for compliance with HOS regulations is always part of a roadside inspection, CVSA is highlighting its importance as it coincides with this year’s April 1 full enforcement of the electronic logging device mandate that went into effect on December 17, 2017, throughout the United States. “Hours of Service violations is the leading category of driver-related violations cited,” said CVSA President Capt. Christopher Turner with the Kansas Highway Patrol. “HOS rules are designed to reduce driver fatigue, which can be a contributing factor in many commercial motor vehicle crashes. Enforcement of hours-of-service requirements is essential to ensuring compliance and combating driver fatigue.” During International Roadcheck, inspectors will primarily conduct the North American Standard Level I Inspection, a 37-step procedure that includes an examination of both driver operating requirements and vehicle mechanical fitness. The vehicle inspection includes checking brake systems, cargo securement, coupling devices, driveline/driveshaft components, exhaust systems, frames, fuel systems, lighting devices, steering mechanisms, suspensions, tires, van and open-top trailer bodies, wheels, rims and hubs, and windshield wipers. Additional items for buses include emergency exits, electrical cables and systems in the engine and battery compartments, and seating. Drivers are asked to provide their operating credentials and hours-of-service logging device (or documentation, as applicable) and will be checked for seat belt usage. Inspectors will also be attentive to apparent alcohol and/or drug impairment. International Roadcheck is sponsored by CVSA, North America’s leading commercial motor vehicle safety enforcement organization, with participation by the U.S. Federal Motor Carrier Safety Administration, Canadian Council of Motor Transport Administrators and the Secretariat of Communications and Transportation in Mexico.